What is the recipe for the laser cutter in Subnautica?
The Laser Cutter in Subnautica is a vital tool that allows you to cut through sealed doors on wrecks. The crafting recipe for the Laser Cutter requires the following items:
- Titanium (x2): You can get Titanium by breaking limestone outcrops, which are found in most biomes.
- Diamond (x2): Diamonds are primarily found in Shale Outcrops, typically located in deeper biomes.
- Cave Sulfur (x1): This can be collected from Crashfish nests.
- Battery (x1): The Battery is made from 2 Acid Mushrooms and 1 Copper Ore.
Remember to craft the Laser Cutter at the Fabricator.
Where can I find the laser cutter fragment locations?
To acquire the Laser Cutter, you must first find its fragments for the blueprints. These fragments can be found in wrecks located in the following biomes:
- Grassy Plateaus: Several wrecks scattered around the Grassy Plateaus contain Laser Cutter fragments. These wrecks are often guarded by Sand Sharks, so proceed with caution.
- Crash Zone: You can find fragments in the wreckage of the Aurora. Be aware of the Reaper Leviathans that patrol this area.
- Sparse Reef: Explore the large wreck located here for potential fragments. The area is relatively safe compared to others.
Remember, the fragments are scattered randomly in these wrecks and biomes, so you might need to search extensively. Use a Scanner to speed up the process.
What are the power usage and entry requirements for the laser cutter?
The Laser Cutter in Subnautica consumes power at a rate of approximately 0.83% per second while active, meaning a fully charged Battery will provide around 2 minutes of continuous cutting. Note that using a higher quality power source like an Ion Battery will extend this time significantly. Regarding entry requirements, the Laser Cutter is designed to open sealed doors within shipwrecks. It will take around 15 seconds of continuous cutting to open a door. However, do ensure that you have enough oxygen supply before starting to cut through because the process is not interruptible once started.
How to use the laser cutter to open sealed doors?
To utilize the Laser Cutter to open sealed doors in Subnautica, follow these steps:
- Equip the Laser Cutter: If you have built the Laser Cutter and have it in your inventory, use the scroll wheel or the number keys to select it.
- Approach the Sealed Door: Find a sealed door within a wreck. These are usually recognizable by the bright orange color and the ‘welded metal’ appearance.
- Start Cutting: Aim your Laser Cutter at the door, and left-click to start cutting. You’ll notice a circular progress indicator on the door. Continue to hold down the left mouse button until the circle is complete.
- Enter the Doorway: Once the cutting process is complete, the door will fall away, allowing you to enter.
Remember to keep an eye on your oxygen levels as cutting takes time, and getting caught without oxygen in a wreck can be deadly. Also, ensure that your Laser Cutter is sufficiently charged before starting the process to avoid any interruptions.
What can I craft using the laser cutter?
The Laser Cutter in Subnautica is not used to craft items, but rather it’s a tool that allows you to access certain areas by cutting through sealed doors within shipwrecks. It’s primarily used for exploration and accessing previously unreachable locations. However, in some of these areas, you may find fragments of valuable technology or blueprints which you can scan with your Scanner tool to unlock new crafting recipes. So indirectly, the Laser Cutter can lead you to new crafting opportunities by opening up these new areas.
Where to find laser cutter fragments in Subnautica?
Finding the Laser Cutter fragments in Subnautica can be a bit challenging given the vast underwater world of the game. However, the fragments are most commonly found in wrecks which are spread throughout the landscape. Key locations include the grassy plateaus, kelp forests, and the crash zone around the Aurora.
The grassy plateaus, known for their red grass and abundance of resources, are a great place to start. You’ll often find wrecks scattered in this area which may contain Laser Cutter fragments.
The kelp forests, identified by their towering kelp stalks and lurking Stalkers, can also yield the fragments. Be cautious in this area due to the presence of the aggressive fauna.
Lastly, the crash zone around Aurora also holds a promising chance of finding the fragments. However, be warned that the crash zone is home to Reaper Leviathans, so proceed with utmost caution.
Remember, the fragments are randomly generated in each game, so you may need to explore a bit before you find all the parts you need. Once you have the fragments, you can use your scanner to collect the Laser Cutter blueprint and start cutting through those sealed doors.
What are the best locations to find the laser cutter fragments?
The most promising locations to find the Laser Cutter fragments in Subnautica include the Grassy Plateaus, the Kelp Forests, and the Crash Zone.
- Grassy Plateaus: The Grassy Plateaus, characterized by their red grass and resource-rich environment, regularly house wrecks that may hold the desired fragments.
- Kelp Forests: The Kelp Forests, known for their towering kelp stalks and home to Stalkers, also present opportunities to locate the fragments. However, be aware of potential threats from the local fauna.
- Crash Zone: The third notable location is the Crash Zone, particularly in the vicinity of Aurora. The crash zone is laden with wrecks and hence, a potential area to find the Laser Cutter fragments. But the presence of Reaper Leviathans mandates careful exploration.
Keep in mind that the fragment locations are randomly generated in each game, so thorough exploration and a bit of patience may be necessary to find all the required fragments.
What is the fan feed or data about the laser cutter fragments?
Fan responses and player data regarding the Laser Cutter fragments in Subnautica contribute significantly to the gaming community’s understanding and strategies. Many players report positive experiences with fragment hunting in the mentioned areas, noting the thrill of exploration and the satisfaction of obtaining the necessary fragments after a perilous journey. User-generated maps and walkthroughs often highlight potential fragment locations and provide invaluable tips for negotiating the dangers of each biome. Some players, however, express frustration with the random generation of fragment locations, citing instances where they’ve struggled to find the last piece to complete the blueprint. Despite these challenges, the consensus among players is that the Laser Cutter is a critical tool for progressing in the game, and the effort needed to obtain it is well worth it.
How many fragments do I need to unlock the laser cutter blueprint?
To unlock the Laser Cutter blueprint in Subnautica, you will need to find three Laser Cutter fragments. These fragments are scattered around the various biomes and can be scanned using your handheld scanner. Once all three fragments have been scanned, the Laser Cutter blueprint will be automatically downloaded to your PDA, and you can fabricate it using the Fabricator or Mobile Vehicle Bay.
What obstacles or dangers should I be aware of when searching for fragments?
Searching for Laser Cutter fragments in Subnautica presents several challenges. Predators are a significant danger, particularly in biomes where the fragments are known to spawn. Stalkers, Sand Sharks, and Reaper Leviathans are among the creatures that can pose a threat to players. Additionally, environmental hazards, such as radiation, extreme temperatures, and depth pressure, can significantly impair the player’s ability to navigate and survive. It’s also worth noting that oxygen management is crucial as running out of air while deep underwater could lead to immediate death. Lastly, the fragments can sometimes be located in wrecks, which often contain labyrinthine passageways that are easy to get lost in. Players are advised to approach these challenges with caution and ensure they are adequately equipped to handle potential threats.
Should I scan for fragments near specific biomes or areas in Subnautica?
Yes, scanning for Laser Cutter fragments near specific biomes can increase your chances of finding them. Wreckages, particularly in the Grassy Plateaus, often contain Laser Cutter fragments. It’s also worth exploring the Dunes and the Crash Zone, as these biomes also frequently house the fragments. However, these areas are home to dangerous predators, like Reaper Leviathans, so proceed with caution. Wreckages are often tricky to navigate and may require tools like the propulsion cannon to move debris. Always ensure that you have sufficient oxygen, food, and water supplies before embarking on your quest for fragments.
How to use the laser cutter in Subnautica?
The Laser Cutter in Subnautica is a handheld tool that can be used to cut open sealed doors on wrecks, allowing you to access areas that were previously inaccessible. To use the Laser Cutter, follow these steps:
- Equip the Laser Cutter in one of the quick slots for easy access.
- Approach the door or object you wish to cut. A small square bracket will appear on the object indicating that it can be cut.
- Hold down the left mouse button (or the equivalent action button on console controllers) to begin cutting. A progress bar will appear, indicating the cutting process.
- Continue until the progress bar is complete. At this point, the cut section of the door will fall, granting access to the area beyond.
Remember, using the Laser Cutter consumes power, so ensure you have spare batteries. It’s also worth noting that some doors take longer to cut than others. Always ensure you have a safe exit strategy in case of an attack by dangerous creatures or rapidly depleting oxygen levels.
What are the materials and tools needed to craft the laser cutter?
Crafting the Laser Cutter in Subnautica requires specific materials and access to certain tools. To begin with, you’ll need the following items:
- Diamond (x2): These can be found in Shale Outcrop, which is located in various biomes like Mountain Island, Sea Treader’s Path, and others.
- Battery: This can be crafted using one Acid Mushroom and one Copper Ore.
- Titanium (x2): You can obtain Titanium by breaking Limestone Outcrops or by using the Fabricator to refine Metal Salvage.
- Cave Sulfur: This item can be found in the nests of Crashfish, small, aggressive creatures that live in caves in the Safe Shallows biome.
Once you’ve gathered these materials, you need to have access to a Fabricator, a tool that allows you to craft equipment. Use the Fabricator to combine the above materials and craft your Laser Cutter.
What locations or structures can I open with the laser cutter in Subnautica?
The Laser Cutter in Subnautica can be used to access various locations and structures that are otherwise inaccessible. Here are a few of them:
- Wreckages: Scattered across the sea floor, you’ll find various wreckages that contain valuable resources and fragments. Some of these require the Laser Cutter to access.
- Aurora: After the explosion of the Aurora ship, some compartments become accessible only with the Laser Cutter.
- Alien Facilities: Certain Alien Facilities, such as the Disease Research Facility and the Thermal Plant, have sealed doors that can be opened using the Laser Cutter.
Remember, always approach these locations with caution. The benefit of accessing new resources or blueprint fragments often comes with the risk of encountering dangerous creatures or hazardous environments.
Can I use the laser cutter to cut through specific materials or obstacles?
Yes, the Laser Cutter in Subnautica is specifically designed to cut through sealed doors within wreckages and some structures. However, it’s important to note that the Laser Cutter cannot be used to cut through natural obstacles like rocks or landscape features, and it also can’t be used as a weapon against creatures. The tool is purely for exploration purposes and for expanding the player’s access to parts of the game world that would otherwise remain inaccessible. Always remember to carry enough power cells for the Laser Cutter as it consumes power rapidly while cutting.
What is the best way to equip and utilize the laser cutter effectively?
To equip and utilize the Laser Cutter effectively in Subnautica, follow these steps:
- Equipping the Laser Cutter: Navigate to the PDA’s inventory and click the Laser Cutter to equip it. Assign it to a quick slot for easier access during exploration.
- Power Management: Always carry extra power cells or batteries. The Laser Cutter consumes power rapidly when in use. You can monitor the power level at the lower left corner of the screen when the Laser Cutter is equipped.
- Identifying Cuttable Doors: Not all doors can be cut open. Look for doors with a ‘welded’ appearance, typically featuring a plate with lines across it. A prompt will appear when you aim the Laser Cutter at a cuttable door.
- Cutting Process: Click and hold the left mouse button (or the respective trigger on a controller) to start cutting. The process takes a few seconds and should not be interrupted.
- Safety Measures: Be aware of your surroundings while cutting doors. Dangerous creatures may be attracted by the light and sound of the Laser Cutter, so ensure your safety first.
Remember, the Laser Cutter is a vital tool for exploration and accessing new areas in the game, but it should be used wisely and cautiously.
Are there any specific dangers or creatures that I need to watch out for when using the laser cutter?
Yes, when using the Laser Cutter in Subnautica, there are several dangers and creatures to watch out for. Notably, the light and noise generated by the Laser Cutter can attract aggressive wildlife. Creatures such as the Cave Crawler, commonly found in caves and wreckages, can pose a significant threat. Similarly, underwater creatures, like Bleeders and Sand Sharks, can also be drawn to the operation of the Laser Cutter. Therefore, it’s vital always to check your surroundings before starting the cutting process and to be ready to retreat at the first sign of danger. Moreover, keep in mind that operating the Laser Cutter reduces your mobility, making you an easier target for these creatures. Always ensure your safety first before attempting to cut open doors or structures.
How to replace the battery in the laser cutter?
Replacing the battery in the Laser Cutter involves a few simple steps:
- Battery Removal: Ensure the Laser Cutter is switched off. Press and hold the ‘Reload’ button (typically ‘R’ on a keyboard, ‘Y’ on an Xbox controller, or ‘Triangle’ on a PlayStation controller) to remove the existing battery.
- New Battery Selection: Once the old battery is removed, it will create a vacant slot for the new one. Navigate to your inventory and select a charged battery.
- Battery Insertion: With the charged battery selected, return to the Laser Cutter and press the ‘Use’ button (typically ‘E’ on a keyboard, ‘A’ on an Xbox controller, or ‘X’ on a PlayStation controller) to insert the new battery.
- Confirmation: You should see a UI update indicating the new power level. This confirmation signals that the battery replacement has been successful.
Remember, it’s always a good strategy to carry spare charged batteries on your expeditions to ensure your Laser Cutter is always ready for use when you need it.
Where can I find the necessary materials to replace the laser cutter’s battery?
The materials required to replace a Laser Cutter’s battery can typically be found in various biomes within the game world. Specifically, you’ll need Copper Ore and Acid Mushrooms to craft a battery.
Copper Ore can be found in Limestone Outcrops, which are common in many shallow biomes, such as the Safe Shallows and Kelp Forest. These outcrops can also be located in the underwater caves of these biomes.
Acid Mushrooms are readily available in the Safe Shallows. These bright, purple fungi stand out against the sandy seabed and are easy to collect.
Remember that copper Ore and Acid Mushrooms are abundant resources in the game. However, exploration and resource management are key aspects of gameplay, ensuring your tool’s batteries are consistently charged and ready for use.
What do I need to do if the battery of my laser cutter runs out?
If the battery of your laser cutter runs out, you need to replace it with a charged one. To do this, follow these steps:
- Battery Removal: Select the Laser Cutter and press the ‘Unload’ button (usually ‘R’ on a keyboard, ‘Y’ on an Xbox controller, or ‘Triangle’ on a PlayStation controller). This action will remove the depleted battery from the tool.
- Battery Creation/Selection: If you have a charged battery in your inventory, select it. If you don’t, you need to craft a new one. To craft a battery, you’ll need Copper Ore and Acid Mushrooms. Use a Fabricator to combine these items and create a new, charged battery.
- Battery Insertion: With the charged battery selected, return to the Laser Cutter and press the ‘Use’ button to insert the new battery.
- Confirmation: You should see a UI update indicating the new power level. This confirmation signals that the battery replacement has been successful.
Remember, it’s always beneficial to carry spare charged batteries during your expeditions to ensure your Laser Cutter is always ready to use.
What are the signs that indicate the need to replace the battery in the laser cutter?
Several signs indicate the need to replace the battery in your Laser Cutter:
- Decreased Power Level: The first and most obvious sign is a decrease in the power level of your Laser Cutter. If you notice that the power level is descending rapidly or is consistently low, it’s time to replace the battery.
- Reduced Efficiency: If your Laser Cutter is taking longer to cut through materials or is struggling to function, this could be a symptom of a drained battery.
- Warning Alerts: The game will also alert you with on-screen prompts such as “Battery Low” or “Battery Depleted” when the battery of your Laser Cutter requires replacement.
- Tool Inactivity: Finally, if your Laser Cutter ceases to operate entirely even when the ‘Use’ button is pressed, this is a clear indicator that the battery needs to be replaced.
Always heed these signs to ensure the optimal performance of your Laser Cutter and to avoid any interruptions in your explorations.
Is there a specific method or tool required to replace the battery in the laser cutter?
No specific tool is required to replace the battery in the Laser Cutter. The process is straightforward and designed to be user-friendly. However, it’s crucial to approach the task with care to avoid accidental damage to the battery compartment or the device itself. Here are the steps involved:
- Device Shutdown: Start by ensuring that the Laser Cutter is switched off. This precaution is necessary to avoid any accidental activation of the tool during the battery replacement process.
- Battery Compartment Access: Locate the battery compartment on the Laser Cutter. Typically, it can be found on the bottom side of the device. Usually, you can open the compartment by sliding or gently prying open the cover.
- Battery Removal: Once the compartment is open, gently remove the depleted battery. Be careful not to use excessive force as the battery connectors are delicate.
- Battery Insertion: Insert the new battery into the compartment, ensuring that the orientation matches the markings inside the compartment.
- Compartment Closure: Close the battery compartment securely.
You should now be able to power on your Laser Cutter and see the refreshed battery status on the device’s display. As always, consult the Laser Cutter’s user manual for device-specific instructions.
Can I extend the battery life of my laser cutter in any way?
Yes, there are ways to extend the battery life of your Laser Cutter. Here are a few suggestions:
- Power Management Settings: Review the power management settings on your device. Some Laser Cutters have power-saving modes that reduce energy consumption when the device is not in active use.
- Regular Maintenance: Regular cleaning and maintenance of your Laser Cutter can also help extend battery life. Dust and debris can cause the device to work harder than necessary, draining the battery faster.
- Optimal Operating Conditions: Try to use your Laser Cutter in optimal conditions. Extreme temperatures, either hot or cold, can affect battery performance and lifespan.
- Responsible Charging: Avoid overcharging your Laser Cutter. It’s generally best to start charging when the battery level falls below 20% and to stop charging when it reaches 100%.
Remember, always refer to your specific Laser Cutter user manual or consult with the manufacturer for the best practices related to your particular device.
What to do if I can’t find laser cutter fragments in Subnautica?
Locating Laser Cutter fragments in Subnautica can sometimes be a challenging task due to the size and complexity of the game’s underwater world. However, there are a few strategies you can employ:
- Explore Wrecks: Laser Cutter fragments are often found in and around shipwrecks. Invest time in thoroughly exploring these areas.
- Use a Scanner Room: If you’ve built a base with a scanner room, you can use it to search for specific items, including Laser Cutter fragments.
- Check the Aurora: Some fragments are located in the Aurora, the crashed spaceship. Be sure you’re adequately equipped before heading there due to the area’s inherent dangers.
- Search the Sea Treader’s Path: This biome is known for having Laser Cutter fragments.
Remember, the locations of fragments may vary with each game playthrough. It’s crucial to explore different areas and be thorough in your search. Patience is key in Subnautica.
Are there any particular strategies or tips for finding the laser cutter fragments more effectively?
There are a few strategies that can help you find the Laser Cutter fragments more effectively in Subnautica:
Utilize the Seaglide’s Light: The Seaglide’s frontal light can be beneficial, especially when exploring deeper areas or during nighttime. It illuminates your path and can help you spot the fragments easily.
Be Observant of Surrounding Cues: Special sound effects or changes in the color of the water can signal the presence of wrecks or interesting objects nearby. These cues can guide you toward potential fragment locations.
Take Advantage of Beacons: Beacons are useful tools for marking explored wrecks or areas of interest. This helps to ensure you don’t waste time re-exploring the same locations.
Practice Safe Exploration: Always keep an eye on your oxygen levels while exploring underwater and keep an escape route in mind. It’s easy to get lost or run out of air while searching for fragments.
In essence, a cautious approach, keen observation, and strategic use of resources can significantly enhance your chances of locating Laser Cutter fragments.
What are the alternative methods or places to find the laser cutter blueprint in Subnautica?
While wrecks are the most common places you’ll find Laser Cutter fragments, there are other methods and places to find these valuable blueprints:
Lifepods: Some Lifepods contain Laser Cutter fragments. For instance, Lifepod 6 in the Grassy Plateaus often has a fragment.
Data Boxes: Certain Data Boxes contain the complete blueprint for the Laser Cutter. Though these are much rarer, they provide the entire blueprint at once, making them a valuable target.
Aurora: The crash site of the Aurora often contains many fragments. However, exploring the Aurora comes with its dangers, including radiation and hostile fauna.
Degasi Seabases: The abandoned seabases of the Degasi survivors often contain multiple fragments. Be cautious, as these locations are usually deep underwater and guarded by dangerous creatures.
Remember, each game’s map is procedurally generated, meaning fragment locations may vary. Persistence and thorough exploration are crucial in your hunt for the Laser Cutter blueprint.
Can I trade or exchange items with other players or NPCs to obtain the laser cutter fragments?
Subnautica operates on a single-player model, meaning interactions with other players or NPCs (Non-Player Characters) for trading or exchanging items are not possible. Every resource, tool, and equipment piece, including Laser Cutter fragments, must be discovered, scanned, and crafted individually by the player. This immersive gameplay encourages exploration, resourcefulness, and self-reliance. It’s important to note that the in-game ecosystem does not offer any trading mechanisms or barter systems with NPCs as seen in other game genres.
Are any hacks or mods available to instantly acquire the laser cutter in Subnautica?
While there are certain unofficial hacks and mods available for Subnautica that claim to instantly provide resources or tools such as the Laser Cutter, these are neither supported nor endorsed by the game developers. Use of such modifications may result in an unstable game environment, progress loss, or even account suspension due to breaches of the game’s terms of service. It is recommended to play the game as designed, discovering and crafting tools and equipment through exploration and resource gathering. This not only ensures a smooth and risk-free gaming experience but also preserves the game’s intended level of challenge and immersion.
Where can I find reliable sources or guides for finding the laser cutter in Subnautica?
Several reliable sources can guide you in finding the Laser Cutter in Subnautica. Official forums like the Subnautica Steam Community and Subnautica Wiki provide comprehensive guides and interactive maps to aid your exploration. Additionally, video platforms such as YouTube host a wealth of gameplay videos, walkthroughs, and tutorials from experienced players. Please remember, that the location of fragments might vary due to the game’s procedural generation. Always follow these guides as a reference rather than an exact blueprint.
Frequently Asked Questions
Q: How do I find the Laser Cutter fragments?
A: You can find laser cutter fragments by exploring wrecks, particularly in the deep Twisty Bridges biome. They are usually located inside containers or scattered on the seabed.
Q: How many fragments do I need to construct the Laser Cutter?
A: You will need to scan and collect a total of five fragments to obtain the blueprint and craft the laser cutter.
Q: What are the best locations to find Laser Cutter fragments?
A: Some of the best places to find laser cutter fragments include the wreckage sites in the Arctic Kelp Caves and around the Sea Monkey Nests.
Q: How do I craft the Laser Cutter?
A: Once you have scanned all five fragments, you can craft the laser cutter at the fabricator. Make sure you have the necessary resources in your inventory.
Q: What resources are needed to craft the Laser Cutter?
A: To craft the laser cutter, you will need a battery, a diamond, and a piece of cave sulfur. These resources can be found in various locations across the game world.
Q: What are some important tips for using the Laser Cutter effectively?
A: When using the laser cutter, make sure to conserve its battery power, as it can drain quickly. Additionally, be cautious of any lurking dangers while cutting through sealed doors.
Q: What are some common scenarios where the Laser Cutter is useful?
A: The laser cutter is particularly useful for accessing sealed compartments in wreckage sites, opening doors in alien structures, and gaining access to valuable loot and resources.
Q: Can the Laser Cutter be used to cut through ice or other obstacles?
A: No, the laser cutter is specifically designed to open sealed doors and containers. It cannot be used to cut through ice or any other environmental obstacles.
References
- Subnautica Wiki: Laser Cutter – The Subnautica Wiki is a comprehensive resource covering all aspects of the game. This specific page provides detailed information on the Laser Cutter, including its blueprint, crafting requirements, and usage.
- Steam Community: Subnautica Guide – A forum discussion on Steam Community where players share tips and strategies for finding and using the Laser Cutter in Subnautica.
- YouTube: Subnautica – How to Find Laser Cutter Fragments Fast – A step-by-step video guide detailing the fastest methods to find Laser Cutter fragments in Subnautica.
- Reddit: r/subnautica – Laser Cutter – A Reddit thread where players share personal experiences and tips on locating and using the Laser Cutter.
- IGN: Subnautica Walkthrough – A part of IGN’s comprehensive game walkthrough, this page provides clear, step-by-step instructions for finding the Laser Cutter.
- GameFAQs: Subnautica – Laser Cutter Guide – A well-structured guide that provides thorough information on the Laser Cutter, its uses, and tips on locating it in the game.
- Gameranx: Subnautica – How to Find All the Tools – This article offers a comprehensive guide on how to find all the tools in Subnautica, including the Laser Cutter.
- Gamepur: Subnautica – Laser Cutter – A game guide detailing how to find and use the Laser Cutter in Subnautica, along with key strategies.
- Subnautica Gamepedia: Laser Cutter – Another detailed Wiki guide that provides an in-depth look at the Laser Cutter, its uses, and how to find it in the game.
- Eurogamer: Subnautica Guide and Walkthrough – This comprehensive guide and walkthrough by Eurogamer provide helpful tips and strategies for Subnautica, including how to find the Laser Cutter.
Recommended Reading: CNC Knife Cutting Machine